Ford 341W / 393 cu. in. Crate Engine
 
Crateengine.net Short Blocks - Ford All CrateEngine.net short blocks consist of Block, Crankshaft, Connecting Rods, Pistons, Piston Rings, Main & Rod Bearings, Cam Bearings, and come fully balanced and assembled. Other services included with the Reconditioned Block are:

Main Lines Checked
Block Magnafluxed
 Sonic Tested for Core Shift
 Bored and Honed with Torque Plates
 Brass Freeze Plugs Installed
 Cam Bearings Installed
 Block Decked
 Block Squared
 Fully Balanced
 
Short Block Components Include:
Click on component to view picture
Assembled Short Block
Assembled Short Block
$3099

Add $100 for H-Beam Super Racing Rods.

Add $250 for Forged Flat Top Pistons

 Crankshaft: SCAT 9000 Series Cast Steel Crank with 3.85" Stroke,
    Knife-Edged, Micro-Polished. Balance with 28oz. Balancer and Flywheel.
 Connecting Rods: 4340 Forged Steel I-Beam Rods 5.956" Long with Floating
    Pins. (Ford Motorsports 351W HO/PRO-Line w/ARP Rod Bolts)
    Add $100 for H-Beam Super Racing Rods.
 Bearings: Clevite P-Series Performance Race Bearings, Clevite Performance
    Cam Bearings
 Pistons: Keith Black Performance Dish or TRW Hypereutectic Pistons
    Can be used with Turbo, Nitrous, and Supercharged Engines.
    
Comp. Ratio for Keith Black (KB)
58cc Heads: 9.0:1
64cc Heads: 8.5:1
76cc Heads: 7.7:1		 Comp. Ratio for TRW
58cc Heads: 11.6:1
64cc Heads: 10.8:1
76cc Heads: 9.5:1

     Add $250 for Forged Flat Top Pistons.
     Custom Pistons available for an additional fee.
     Note: Kits based on Flat Top Pistons. Dome, Dish, Custom Pistons available for added fee.
     Compression based on 0 Deck Height. Comp may be lower if block not decked.
Piston Rings: Sealed Power Moly Piston Rings - 5/64 x 5/64 x 3/16.
 
 
Optional Additions Installed Include:
Cam Kits Cam Kits - High Performance True Roller Timing Set with:
Custom Schneider Hardened Steel Billet Hydraulic or Solid Cam   
    Dyno-Designed for Stroker Applications.  Add...... $275
Custom Schneider Hardened Steel Billet Roller Cam Dyno-Designed for Stroker
    Applications.  Add...... $349
 
Oil Pan Kits Oil Pan Kits - Include
Melling HV Oil Pump
Chrome Moly High Performance Oil Pump
    Shaft
High Performance Oil Pan Gasket
Milodon Performance Oil Pan
 All Pans include Milodon Performance
   Pickups. Some pans may not fit Stroker
   Applications.		 #30730 Car '69-'75 Trucks '69+up
#30926 Low Profile Front Sump Pre '74
#31126 Late Model Rear Sump '81+up (Mustangs & like Chassis)
#31481 Drag Race
#30530 4X4 and off Road Rear Sump
Add... $390 (#30730 Pan Only)
Add... $580 All Other Pans
 
AFR Aluminum Heads
AFR Aluminum Heads
 Add $2199

 Pro Cyclone Steel and Aluminum Cylinder Heads
Pro Cyclone Heads
Steel - Add $1799
Aluminum - Add $1999		 Head Kits - Include
Fel-Pro Performance Head Gaskets
ARP Head Stud Kit
Aluminum Roller Rockers
Chrome Moly 5/16 Diameter Pushrods
Hydraulic or Solid Lifters
(Schneider Roller Lifters available for an addt'l $299)

With Air Flow Research (AFR) Aluminum Heads
185cc Runners
64cc Chambers
Click here for info on AFR 185cc Heads
Add... $2199

With Steel Pro Cyclone Heads
200cc/215cc heads
58/64cc runners set up for Hydraulic springs
550 lift
With Aluminum Pro Cyclone Heads
200cc heads
58/64cc runners set up for Hydraulic springs
550 lift
Click here for info on Pro Cyclone Heads
Steel Heads Add... $1799
Aluminum Heads Add... $1999