Ford 427/470 FE Stroker Kits
 
All CrateEngine.net short blocks consist of Block, Crankshaft, Connecting Rods, Pistons, Piston Rings, Main & Rod Bearings, Cam Bearings, and come fully balanced and assembled. All Blocks are assembled with NEW Genesis Cast Iron or Aluminum Blocks.

Other services included with the Re-conditioned Block are:

Bores left on the small side for custom piston sizing
Ductile Iron sleeves with an aluminum block
(6) Specially designed freeze plugs and specially designed oil plugs
 Caps installed - lined bored complete w/top & side bolts & washers
 An oil check valve
 Alignment pins for head to deck mounting
 10 1/4 to 18 plugs
 A traceable serial number imprinted on every Genesis 427 Block
 Head Bolt Threads are cut 1/4" deeper than stock
 Fully Balanced
 Block Decked
 Block Squared
 Bored with Torque Plates
 Cam Bearings Installed
 Freeze Plugs Installed
 
Short Block Components Include:
Click on component to view picture

Assembled Short Block
$6899

Add $1800 with Forged Billet Cranks
Add $1000 for Aluminum Block

Other connecting rods available upon request		 Crankshaft: SCAT 9000 Series Cast Steel Crank with 4.125" Stroke,
    Knife-Edged, Micro-Polished, Internally Balanced for Maximum Horsepower.
 Connecting Rods: 4340 Forged Steel H-Beam Rods 6.700" Long Profiled,
    ARP Cap Screws, Precision Sized & Balanced.
 Bearings: Clevite H-Series Performance Race Bearings Clevite Performance
    Cam Bearings
 Pistons: SRP/JE, Probe, Wiseco, Venolia Forged Pistons can be used with
    Turbo, Nitrous, and Supercharged Engines. Compression ratio of your choice.
Piston Rings: Speed-Pro/JE Plasma Moly Piston Rings - 1/16 x 1/16 x 3/16.
 
 
Optional Additions Installed Include:
Cam Kits
Cam Kits 		Cam Kits - High Performance True Roller Timing Set
Custom Schneider Hardened Steel Billet Hydraulic or Solid Cam 
    Dyno-Designed for Stroker Applications.  Add...... $275
 Custom Schneider Hardened Steel Billet Roller Cam Dyno-Designed for Stroker
    Applications.  Add...... $349
 
Oil Pan Kits
Oil Pan Kits
add $580		 Oil Pan Kits - Include
Melling HV Oil Pump
Chrome Moly High Performance Oil Pump
    Shaft
High Performance Oil Pan Gasket
Canton Low Profile Oil Pan
 All Kits include Canton Performance Pan and windage tray (some fabricating 
    may be necessary on windage tray over 3.98" stroke).  Add... $580
 

Edelbrock Heads		 Assembled Head Kits include:
 Fel-Pro Performance Head Gaskets
 ARP Head Studs
 Chrome-Moly 3/8" Diameter Push Rods
 Hydraulic or Solid Lifters available (add additional $300 to prices below)
 New Stock Rocker Arm Assembly
 
Edelbrock Head Available in Stage 1, 2 and 3
  • Stage 1: Stock from Factory
  • Stage 2: Includes Stage 1 plus pocket porting, intake port match and port clean up and full exhaust porting.
  • Stage 3: Includes Stage 1 & 2 plus full intake porting, re-shape chambers to unshroud valves and polish combustion chambers.
Application  *Stage 1 *Stage 2 *Stage 3
428 2.09 intake, 1.66 exhaust Add $2088 $2568 Add $2788
427 2.09 intake, 1.66 exhaust Add $2088 $2568 Add $2788
428 2.19 intake, 1.73 exhaust Add $2488 $2888 Add $3188

* Stage 1: Recommended for FE from 390-428 cu.in.
* Stage 2: Recommended for FE from 428-454 cu.in.
* Stage 3: Recommended for FE from 454-485 cu.in.

Spring & Springs Packages Available in Stage 1, 2 and 3 Also!

  • Stage 1: Springs up to 550 Lift Flat Tappet STD from factory AT NO COST!
  • Stage 2: Springs package 710-720 Lift Street Solid Add... $199
  • Stage 3: Springs package 800 Lift and up Roller Add... $499
Average Flow Figures 6006(428), 6007(427) Out of Box Stage 1
Stage 1 (6006-6007) at 700 lift with 209 Intake 1.65 Exhaust 252 Intake 221 Exhaust
Stage 2 (6006-6007) at 700 lift with 209 Intake 1.65 Exhaust 268 Intake 234 Exhaust
Stage 3 (6006-6007) at 700 lift with 209 Intake 1.65 Exhaust 288 Intake 240 Exhaust
Stage 3 (6007) at 700 lift with 2.19 Intake 1.75 Exhaust 315 Intake 235 Exhaust
 
Pro-Line Stud Girdle
Pro-Line Stud Girdle
$189
Additional Parts Available!
Description Part # Add Price
Fel-Pro Intake 1246 $18
Fel-Pro Head Gaskets 1020 $33 each
Hussey Copper Gasket .031-.105 2222 $69.99 and up
ARP Head Studs 155-4001 $92
ARP Head Bolts 155-3601 $49
ARP Main Bolts 155-5201 $46
ARP Main Studs 155-5421 $49
Pro-Line Stud Girdle 2073 $189
Complete Gasket Set K52307 $49.99
 
CNC Billet Steel Rocker Stands
CNC Billet Steel Rocker Stands
$189 (8 pieces)		 Also - Machined CNC Billet Steel Rocker Stands!
These are a set of Machined CNC Billet Steel Rocker Stands. These stands will take any punishment for street, strip, drag or marine applications. They fit Edelbrock 428(6006) or 427(6007) Heads. They will also fit Stock Heads except medium riser tunnel-port or high riser heads, Hyd or mechanical cams.  Add... $159 (8 pieces)
 
More Items Available:
Erson Roller Rockers ...Details here

Edelbrock FE Intakes		 Edelbrock FE Intakes ...Details here
Blue Thunder Intakes ...Details here
Note: 2X4 Intake w/carbs & linkage available. Please call.

Milodon Ford Valve Covers		 Milodon Valve Covers ...Details here
Shelby Vale Covers ...Add $179
Shelby Timing Covers ...Add $125